Hive - Version 2.0.0.BETA1#
Module Summary#
Integrate with Hive Media Control
Module Status#
Note: Please be aware that this is a beta version of this IO Module which has not yet been fully tested. We recommend testing before use.
If you encounter any issues with this module, or have any feedback regarding its operation, please contact our support team.
Module Scope#
This module does not support authentication, this must be disabled on the Hive Media Controller
Release Notes#
Version 2.0#
Initial release.
Minor point releases (eg. 1.1.x) will be for small fixes and may not be listed here.
Operation#
Instance Properties#
Set the IP address to that configured on the device.
Checking the Extended Logging checkbox will provide more detailed log messages. This is intended for diagnostics and problem solving and should ideally be disabled during normal operation.
Actions#
Select Media File#
Sends a request to the device to select media File number for Layer.
Select Media Folder#
Sends a request to the device to select media Folder number for Layer.
Select In Frame#
Sends a request to the device to select the Frame number from which media playback should start for Layer.
Select Out Frame#
Sends a request to the device to select the Frame number from which media playback should should end or loop for Layer.
Select Play Mode#
Sends a request to the device to select the Mode which should be applied to how the media plays for Layer.
Select Play Speed#
Sends a request to the device to select the play Speed of the media for Layer.
| Value | Description |
|---|---|
| 0.0 | Stop |
| 0.001 to 0.499 | Slower |
| 0.5 | Normal speed |
| 0.501 to 1.0 | Faster |
Select Scale#
Sends a request to the device to select the Scale of the media for Layer.
| Value | Description |
|---|---|
| 0.0 to 4999 | Zoom out |
| 0.5 | 100% |
| 0.5001..1.0 | Zoom in |
Select Blend Mode#
Sends a request to the device to select the Mode which should be applied to blending with any layers appearing below Layer.
Set Intensity#
Sends a request to the device to select media Intensity for Layer.
Support#
If you encounter any issues with this module, please contact our support team.