ETC Response SnapBack - Version 2.0.0#

Module Summary#

Interact with an ETC Response SnapBack.

Module Status#

This IO Module is stable and has been tested internally.

If you encounter any issues with this module, or have any feedback regarding its operation, please contact our support team.

Release Notes#

Version 2.0#

  •  Initial release.

Minor point releases (eg. 1.1.x) will be for small fixes and may not be listed here.

Operation#

Module Properties#

Set the Local UDP Port (default 4703) to that configured on the device for Subscription Devices.
If Subscription Devices are not used, then this can be ignored.

Allow Reports From sets the allowed trigger sources:

Any source Any source reporting with matching Device number will be accepted
Instances only Only sources reporting with with matching IP Address and Device number matching an instance will be accepted

Checking the Extended Logging checkbox will provide more detailed log messages. This is intended for diagnostics and problem solving and should ideally be disabled during normal operation.

Instance Properties#

Set the IP Address, UDP Port (default 4703), and Device number to that configured on the device.

Checking the Extended Logging checkbox will provide more detailed log messages. This is intended for diagnostics and problem solving and should ideally be disabled during normal operation.

Status Variables#

The IO Modules tab of the web interface provides status variables to shows information about the module and monitor its state.

Device Assigned device number
Active preset Currently active preset number

Triggers#

Preset active#

Fires when the device reports an active preset for the instance Device number.

Trigger variables:

  • Variable 1: Device number (integer).

  • Variable 2: Preset (integer).

  • Variable 3 (Optional): Fade time (seconds) (number)

Preset recorded#

Fires when the device reports an preset has been recorded for the instance Device number.

Trigger variables:

  • Variable 1: Device number (integer).

  • Variable 2: Preset (integer).

Actions#

Activate preset#

Sends a request to the device to activate Preset, with Fade time.

Record preset#

Sends a request to the device to record Preset.

All off#

Sends a request to the device to set all off, with Fade time.

Contact resync#

Sends a request to the device to resync the devices analog inputs.

Support#

If you encounter any issues with this module, please contact our support team.