Controller Digital Input Status - Version 2.0.0

Module Summary

Displays the status of each of a Network Primary’s digital inputs in the IO modules tab of the web interface.

Module Status

This IO Module is stable and has been tested internally.

If you encounter any issues with this module, or have any feedback regarding its operation, please contact our support team.

Module Scope

The digital inputs can only be those physically on the Network Primary or any RIOs associated with the Network Primary.

Release Notes

Version 2.0

•  Initial release.

Minor point releases (eg. 1.1.x) will be for small fixes and may not be listed here.

Operation

There are no Triggers, Conditions or Actions associated with this module.

Instance Properties

The High State Label defines how a high state is displayed on the web interface. The defualt is High.

The Low State Label defines how a low state is displayed on the web interface. The defualt is Low.

Set the Input [number] to the physical digital input, as configured in the Network tab. Optionally, a descriptive Input [number] Label can be specified that will be displayed on the IO module table of the web interface along with the input’s current state (or an error message if applicable).

The inputs would commonly be inputs 1-8 of an LPC but can in fact be any combination of inputs on the Network Primary Controller or any RIO devices associated with thew Network Primary.

Status Variables

The IO Modules tab of the web interface provides status variables to shows the state of each input.

Support

If you encounter any issues with this module, please contact our support team.