Madrix Aura - Version 2.0.0#
Module Summary#
Remote control of a Madrix Aura using HTTP.
Module Status#
This IO Module is stable and has been tested internally.
If you encounter any issues with this module, or have any feedback regarding its operation, please contact our support team.
Release Notes#
Version 2.0#
Initial release.
Minor point releases (eg. 1.1.x) will be for small fixes and may not be listed here.
Configuration#
The HTTP Remove Event configuration of the Madrix Aura must match that of the Instance Properties.
Configuration of the Madrix Aura is performed using the Madrix Aura’s built in web interface, initial setup is performed using Madrix Hardware Manager.
Operation#
Instance Properties#
Set the IP Address to that configured on the device.
Each Command x property value should be made to correspond with the matching Madrix Aura HTTP Remove Event Command.
The default value expressed in the module, match the default values obtained by clicking “D” button in the “Remote Event List” on the Madrix Aura builtin configurer.
Please note: The defaults created by the “D” button may include undesired remote control via eDMX. Ensure that the settings are suitable for your system after setting these defaults.
Further details on how to set this on the Madrix Aura can be found at Madrix Aura Support
Checking the Extended Logging checkbox will provide more detailed log messages. This is intended for diagnostics and problem solving and should ideally be disabled during normal operation.
Actions#
Command Scene#
Command the Madrix Aura to recall cue/scene Value.
Command Play#
Command the Madrix Aura to start playback.
Command Pause#
Command the Madrix Aura to pause playback.
Command Stop#
Command the Madrix Aura to stop playback.
Command Record#
Command the Madrix Aura to start recording.
Command Next#
Command the Madrix Aura to skip to the next cue/scene.
Command Previous#
Command the Madrix Aura to skip to the previous cue/scene.
Command Intensity#
Command the Madrix Aura to sets the master brightness to Value.
Command Intensity (Increment)#
Command the Madrix Aura to increase master brightness by Value.
n.b. The remote event action Value Type will need to be set to Input Value
Command Intensity (Decrement)#
Command the Madrix Aura to decrease master brightness by Value.
n.b. The remote event action Value Type will need to be set to Input Value
Command Speed#
Command the Madrix Aura to sets the speed to Value.
Command Intensity (Increment)#
Command the Madrix Aura to increase speed by Value.
n.b. The remote event action Value Type will need to be set to Input Value
Command Intensity (Decrement)#
Command the Madrix Aura to decrease speed by Value.
n.b. The remote event action Value Type will need to be set to Input Value
Support#
If you encounter any issues with this module, please contact our support team.