Wattstopper PLUS - Version 2.0.0.BETA5#

Module Summary#

Integrate with Legrand Wattstopper PLUS via a System Support Unit (SSU).

Module Status#

Note: Please be aware that this is a beta version of this IO Module which has not yet been fully tested. We recommend testing before use.

If you encounter any issues with this module, or have any feedback regarding its operation, please contact our support team.

Release Notes#

Version 2.0#

  •  Initial release.

Minor point releases (eg. 1.1.x) will be for small fixes and may not be listed here.

Operation#

Note: Throughout this module various ID numbers are required, these will be provided by the Wattstopper PLUS Certified Startup Technician.

Module Properties#

Set the SSU Hostname to the host name or IP address configured on the SSU.
Set the Username and Password to the appropriate authentication credentials.

Checking the Extended Logging checkbox will provide more detailed log messages. This is intended for diagnostics and problem solving and should ideally be disabled during normal operation.

Instance Properties#

Set the Organization ID, EncSystem ID, and Organizational Area ID (aka Node ID); to that provided by the Wattstopper PLUS Certified Startup Technician of the Sytem and Organizational Area to be monitored and controlled.

Note: Organization ID – For on premise installations, the value is likely to be the same for all systems: 00000000-0000-0000-0000-000000000001

Checking the Extended Logging checkbox will provide more detailed log messages. This is intended for diagnostics and problem solving and should ideally be disabled during normal operation.

Triggers#

Brightness#

Fires when the Controller receives a message that the monitored node ID has altered brightness.

The trigger can be restricted using Action to if the brightness Changes in range between Minimum and Maximum, or if the brightness Enters range between Minimum and Maximum.

Trigger variables:

  •  Variable 1: Organization ID (string).

  •  Variable 2: EncSystem ID (string).

  •  Variable 3: Node ID (string).

  •  Variable 4: Brightness percent (number).

State#

Fires when the Controller receives a message that the monitored node ID has control status matching State.

Trigger variables:

  •  Variable 1: Organization ID (string).

  •  Variable 2: EncSystem ID (string).

  •  Variable 3: Node ID (string).

  •  Variable 4: Control state (“on” or “off”).

Scene#

Fires when the Controller receives a message that the monitored node ID has recalled a new scene with matching Alias.

Trigger variables:

  •  Variable 1: Organization ID (string).

  •  Variable 2: EncSystem ID (string).

  •  Variable 3: Node ID (string).

  •  Variable 4: Scene alias (integer).

Colour Temperature#

Fires when the Controller receives a message that the monitored node ID has altered colour temperature.

The trigger can be restricted using Action to if the temperature Changes in range between Minimum and Maximum, or if the temperature Enters range between Minimum and Maximum.

Trigger variables:

  •  Variable 1: Organization ID (string).

  •  Variable 2: EncSystem ID (string).

  •  Variable 3: Node ID (string).

  •  Variable 4: Colour temperature, kelvin (integer).

Actions#

Set Brightness#

Sends a request to the node ID to set the brightness to Level.

Recall Scene#

Sends a request to the node ID to recall the scene Alias.

Set State#

Sends a request to the node ID to set the control state as On, Off, or Toggle.

Set Colour Temperature#

Sends a request to the node ID to set the colour temperature to Temperature.

Support#

If you encounter any issues with this module, please contact our support team.