Color Kinetics Ethernet Keypad - Version 2.1.1#

Module Summary#

Integrates a Philips Color Kinetics Ethernet and Antumbra Ethernet Keypads.

Module Status#

This IO Module is stable and has been tested internally.

If you encounter any issues with this module, or have any feedback regarding its operation, please contact our support team.

Module Scope#

Compatible Hardware:

  •  Philips Antumbra 6 Button Keypad with the “Ethernet Communication Module”

  •  Philips Color Kinetics 11 Button “Ethernet Controller Keypad”

  •  Philips Color Kinetics iOS “Remote Kpad App” (Always serial number “00000000”)

Release Notes#

Version 2.1#

  •  Added extra logging.

  •  Added extra error checking.

  •  Added Extended Logging option.

Version 2.0#

  •  Updated documentation.

Minor point releases (eg. 1.1.x) will be for small fixes and may not be listed here.

Configuration#

By default, Keypads have an IP address of 10.x.x.x/8. To configure and communicate with the Keypad, your machine must be in the same range.

Operation#

Instance Properties#

Specify the Keypad’s IP Address or set the IP Address to 255.255.255.255 to match any Keypad on the network.

Status Variables#

The IO Modules tab of the web interface provides status variables to shows information about the module and monitor its state.

Last Button Pressed    Button number or type
Serial Number Last received serial number
IP Address Last IP address received
Last Action Last outbound command

Triggers#

Button Press#

Fires when a specified Button Any (or any) is pressed on the keypad of a given instance.

Trigger Variables#

  1. Button ID (integer)

  2. Serial number (string)

  3. IP address (string)

  4. Button description (string)

Actions#

Set LED#

Sends a command to Keypad to set an Effect on an LED.

Support#

If you encounter any issues with this module, please contact our support team.